Kia Forte BD Quiz
Body Electrical System

Hazard Warning Switch

In this manual: Body Electrical System
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
5steps
~30min
2/5difficulty
Done 0 of 5

Repair Procedures

Inspection

  1. Check the circuit between the terminals for continuity.

    Pin Function
    1 Ground
    2 Hazard Warning Lamp Indicator
    3 Hazard Warning Lamp Mode
    4 -
    5 Battery (+)
    6 -

Removal

  1. Disconnect the negative (-) battery terminal.

  2. Remove the center crash pad assembly trim.

    (Refer to Body - "Crash Pad Center Assembly")

  3. Remove the center ventilator (A).

  4. Disconnect the connector (A).

  5. Remove the hazard switch (A) after loosening the screws.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.