Kia Stinger CK Quiz
Automatic Transmission System

Speed Sensor

In this manual: Automatic Transmission System
General Information — 8Maintenance — 27Engine Mechanical System — 47Engine Electrical System — 19Emission Control System — 12Engine Control System/Fuel System — 51Automatic Transmission System — 34All-Wheel Drive (AWD) System — 7Drive Shaft and Axle — 15Suspension System — 25Steering — 8Restraints — 19Brake System — 22Body (Interior and Exterior) — 47Front Seat Belt — 63Body Electrical System — 99Windshield Wiper/Washer — 11Heating, Ventilation, and Air Conditioning — 32
~1min read

Specifications

Specifications

Item Specification
Type Hall Effect Sensor
Operating condition (°C) °F (-40 to 150) -40 to 302
Output voltage (V) High: 1.4
Low: 0.7

Components and Component Location

Components

1. Electronic Module Connector
2. Output Speed Sensor
3. Input Speed Sensor		 4. Transmission Fluid Temperature Sensor
5. Shift Solenoid Valve Connector (Indirect Control)
6. Shift Solenoid Valve Connector (Direct Control)

Description and Operation

Description

  • The speed sensor is integrated into the E-module.

  • The speed sensor uses an electric current type Hall sensor, in which the current is changed

  • The speed sensor measures the rotational speed of the input and output shafts inside the transmission and sends the readings to the TCM.

  • The sensor provides important inputs used in feedback control, torque converter clutch control, shift control, line pressure control, clutch pressure activation control, and sensor malfunction analysis.

Circuit Diagrams

Wiring Diagram

Repair Procedures

Inspection

  1. Check the speed sensor signal waveform using KDS.

Replacement

  1. Replace the electronic module.

    (Refer to Automatic Transmission Control System - "E-Module")

Test yourself

A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.