Automatic Transmission System
Transmission Fluid Temperature Sensor
In this manual: Automatic Transmission System
4steps
~24min
2/5difficulty
Done 0 of 4
Specifications
Specifications
| Item | Specification | |
| Oil Temperature Sensor | Type | *NTC thermistor |
| Temp. [(°C)°F] / Resistance (kΩ) | (-40)-40/139,5 | |
| (-20)-4/47,4 | ||
| (0)32 / 18,6 | ||
| (20)68/8,1 | ||
| (40)104/3,8 | ||
| (60)140/1,98 | ||
| (80)176/1,08 | ||
| (100)212/0,63 | ||
| (120)248/0,38 | ||
| (140)284 / 0,25 | ||
| (150)302/0,16 | ||
*NTC: Negative Temperature Coefficient
Components and Component Location
Components

| 1. Electronic Module Connector 2. Output Speed Sensor 3. Input Speed Sensor |
4. Transmission Fluid Temperature Sensor 5. Shift Solenoid Valve Connector (Indirect Control) 6. Shift Solenoid Valve Connector (Direct Control) |
Description and Operation
Description
The sensor used is a thermistor (NTC), whose resistance changes with temperature.
When the TCM supplies power to the sensor, the sensor output value changes depending on the ATF temperature.
The transmission fluid temperature sensor is integrated into the E-module.
Circuit Diagrams
Wiring Diagram

Repair Procedures
Inspection
Turn the ignition off.
Disconnect the main connector (A).

Measure the resistance between terminal + (15) and terminal - (16).
Make sure the resistance is within specification.
Item Specification Oil Temperature Sensor Type *NTC thermistor Temp. [(°C)°F] / Resistance (kΩ) (-40)-40/139,5 (-20)-4/47,4 (0)32 / 18,6 (20)68/8,1 (40)104/3,8 (60)140/1,98 (80)176/1,08 (100)212/0,63 (120)248/0,38 (140)284 / 0,25 (150)302/0,16
Replacement
Replace the electronic module.
(Refer to Automatic Transmission Control System - "E-Module")
Test yourself
A quick Kia Stinger CK quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?