Junction Box (Passenger Footwell)

Components and Components Location

COMPONENTS LOCATION

Instrument Panel Fuse Block (I/P)

Circuit (Instrument Panel Fuse Block)

repair procedures

FUSE INSPECTION

1. 1

   Make sure the fuse holders are securely fastened and the fuses are firmly seated in the holders.

2. 2

   Check that the fuse rating is appropriate for each circuit.

3. 3

   Inspect the fuses for damage.

Diagnosis Using KDS

1. 1

   Diagnosis of the interior fuse block can be performed using the KDS. The interior fuse block is linked to the KDS, which then displays input and output signals with codes.

2. 2

   To diagnose the interior fuse block operation, select the vehicle model, then the interior.

3. 3

   To request the current input/output value of the interior fuse block, check the "Current Data". Here the input/output status of the interior fuse block is displayed.

4. 4

   If a functional test of the interior fuse block outputs is required, select "Actuation Test".

expansion

1. 1

   Disconnect the battery ground cable.

2. 2

   Remove the lower instrument panel trim.

   (Refer to Body - "Lower Instrument Panel Trim")

3. 3

   Disconnect the connector (A) from the front side of the interior fuse block.

4. 4

   Remove the clamp (B) from the interior fuse block.

   

5. 5

   Loosen the mounting nuts, then remove the interior fuse block (A).

   

6. 6

   Disconnect the connector (A) from the rear of the interior fuse block.

   

Installation

1. 1

   Install the interior fuse block.

2. 2

   Connect the connectors to the interior fuse block.

3. 3

   Install the lower instrument panel.

4. 4

   Connect the negative (-) battery terminal.

5. 5

   Make sure all systems operate properly.