Heating, Ventilation, and Air Conditioning

receiver-drier

6steps
~36min
2/5difficulty
010203040503.22N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Repair Procedures

REMOVAL AND INSTALLATION

  1. Condenser removal.

  2. Kappe (B) am Boden des Kondensators mit einem L-Schlüssel (A) entfernen.

    Anzugsdrehmoment: 2,7 ~ 3.2 N·m

  3. Trocknungsmittel (A) mithilfe einer Spitzzange aus dem Kondensator entfernen. Auf zerkrümeltes Trocknungsmittel und verstopften BodendeckeÖlfilter prüfen.

  4. Apply air conditioning compressor oil to the O-rings and threads of the new bottom cover.

  5. Insert new desiccant into the liquid receiver with the drier insert. The desiccant must be kept sealed under vacuum until it is exposed to air for installation.

  6. Den neuen Bodendeckel am Kondensator anbringen.

Test yourself

A quick Kia Stonic quiz: every answer comes with an explanation and a link to the manual page.