Kia Rio YB Quiz
Engine Control System/Fuel System

Fuel Pressure Regulator

In this manual: Engine Control System/Fuel System
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
8steps
~48min
2/5difficulty
Done 0 of 8

Repair Procedures

Removal

  1. Remove the fuel pump.

    (See Fuel System - "Fuel Pump")

  2. Disconnect the fuel pump motor connector (A) and the fuel level sensor connector (B).

  3. Remove the retaining clip (B), then disconnect the fuel feed tube quick-connect fitting (A).

  4. Remove the retaining clip of the cushion tube (A), then separate the head assembly (B) from the reservoir cup.

  5. Press the locking hook (A) with a screwdriver and remove the fuel level sensor in the direction of the arrow.

  6. Remove the reservoir cup (B) after releasing the locking hooks (A).

  7. Remove the fuel pressure regulator retaining bracket (A).

  8. Remove the fuel pressure regulator (A) from the fuel filter.

Installation

  1. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.