Fuel filter

Repair Procedures

Removal

1. 1

   Remove the fuel pump.

   (See Fuel System - "Fuel Pump")

2. 2

   Disconnect the fuel pump motor connector (A) and the fuel level sensor connector (B).

   

3. 3

   Remove the retaining clip (B), then disconnect the fuel feed tube quick-connect fitting (A).

   

4. 4

   Remove the retaining clip of the cushion tube (A), then separate the head assembly (B) from the reservoir cup.

   

5. 5

   Press the locking hook (A) with a screwdriver and remove the fuel level sensor in the direction of the arrow.

   

6. 6

   Remove the reservoir cup (B) after releasing the locking hooks (A).

   

7. 7

   Disconnect the ground terminal (A).

   

8. 8

   Remove the retaining clip (A) and support the fuel pump assembly (B).

   

9. 9

   Remove the fuel filter (A) after releasing the retaining hooks.

   

10. 10

    Separate the fuel pump motor (A).

    

11. 11

    Replace with a new fuel filter.

    

Installation

1. Install in the reverse order of removal.