Using the TMK repair kit
In this manual: Using the TMK repair kit
10steps
~60min
3/5difficulty
Done 0 of 10
1. Fill with sealant strictly following the specified sequence, otherwise the sealant may escape under high pressure.
- Shake the sealant container.
- Screw the connecting hose 9 onto the sealant container connector.
- Make sure the button 8 on the compressor is not pressed.
- Unscrew the cap from the valve of the damaged tire and screw the hose 2 of the sealant container onto the valve.
- Place the sealant container into the compressor housing so that the container is in an upright position.

- Make sure the compressor is off, position 0.
- Connect the compressor to the vehicle's power outlet using the cable and connectors.
- With the ignition on:
Turn on the compressor and let it run for about 3 minutes to fill with sealant.
The tire pressure after filling is not important.
- Turn off the compressor.
- Disconnect the hoses from the sealant container connector and from the tire valve.
Return the TMK repair kit to its storage location in the vehicle.
WARNING Carbon monoxide poisoning and suffocation are possible if you leave the engine running in a poorly ventilated or enclosed area (such as inside a building).Test yourself
A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?