Kia Rio YB Quiz

Front wiper blade

In this manual: Front wiper blade
Maintenance and Service — 0Driving the vehicle — 0Getting to know your vehicle — 0Vehicle security systems — 0Introduction — 0Vehicle exterior — 0Emergency Procedures — 0Infants and small children — 0Older children — 0Pregnant women — 0Injured persons — 0Airbag crash sensors — 0Airbag deployment conditions — 0Airbag non-deployment conditions — 0Battery saver function — 0Follow Me Home function (if equipped) — 0Headlamp welcome function (if equipped) — 0Light control — 0High beam operation — 0Front fog lights (if equipped) — 0Rear Fog Light — 0Headlight Beam Leveling Device (if equipped) — 0Battery saver function — 0Follow Me Home function (if equipped) — 0Headlamp welcome function (if equipped) — 0Light control — 0High beam operation — 0Front fog lights (if equipped) — 0Rear Fog Light — 0Headlight Beam Leveling Device (if equipped) — 0Replacing the Headlight, Parking Light, Turn Signal Light, or Front Fog Light Bulb — 0Headlight beam leveling for headlights and front fog lights — 0Turn signal light bulb replacement — 0Rear combination lamp bulb replacement — 0Additional brake light replacement (if equipped) — 0Interior lamp bulb replacement — 0
3steps
~18min
2/5difficulty
Done 0 of 3

Type A

Pióro przedniej wycieraczki

  1. Lift the wiper arm
CAUTION Do not let the wiper arm drop onto the panoramic windshield, as this may chip or crack the panoramic windshield.
Pióro przedniej wycieraczki

  1. Lift the wiper blade latch.
Then push the wiper blade assembly down and remove it.
  • Install the wiper blade assembly in the reverse order of removal.
  • Return the wiper arm to its original position.

    • Type B

    Pióro przedniej wycieraczki

    CAUTION Do not let the wiper arm drop onto the windshield, as this may scratch, chip or crack the vehicle's windshield.
    1. Lift the wiper arm and rotate the blade assembly to expose the plastic retaining clip.
    Pióro przedniej wycieraczki

    1. Squeeze the clip and slide the blade assembly down.
    2. Lift the arm.
    3. Install the blade assembly by reversing the steps.

    Test yourself

    A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.