Pre-driving checks and adjustments - Hood
In this manual: Pre-driving checks and adjustments - Hood
~1min read

1. Pull the hood lock release handle 1 located below the driver side instrument panel. The hood will spring up slightly.
2. Push the lever 2 upward, toward the hood as illustrated with your fingertips
3. Raise the hood 3.
4. Remove the support rod and insert into the slot 4.
When closing the hood, lower it slowly and make sure it locks into place.
WARNING
- Make sure the hood is completely closed and latched before driving.
Failure to do so could cause the hood to fly open and result in an accident.
- If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.
Was this page helpful?