Rear side member extension

INTRODUCTION

Replacing this part is a complementary operation to replacing the rear end cross member.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on other parts is covered in their respective sections.

Use of a repair bench is recommended to ensure the rear cross member is aligned correctly.

PART COMPOSITION M.P.R.

Part assembled with tie-down ring (left side).

LIST OF LINKS:

Rear side member

PARTS CONCERNED (thickness in mm):

1. 1

   Rear side member extension 1.5

2. 2

   Rear side member 1.5

3. 3

   Tie-down ring (left side) 1.5