Rear absorber reinforcement

INTRODUCTION

For a rear impact, replacing this part is a complementary operation to replacing the rear apron.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on other parts is covered in their respective sections.

PART COMPOSITION M.P.R.

Part only.

LIST OF LINKS:

Rear absorber reinforcement
Rear end cross member

PARTS CONCERNED (thickness in mm):

1. 1

   Rear absorber reinforcement 1

2. 2

   Rear end cross member 1.2

3. 3

   Tie-down ring (left side) 1.5

4. 4

   Rear side member extension 1.5