Renault Kangoo Quiz
Bodywork

Rear floor centre cross member

In this manual: Bodywork
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
3steps
~18min
2/5difficulty
Done 0 of 3

INTRODUCTION

Replacing this part is a supplementary operation to replacing the rear side member for a rear side impact.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on other parts is covered in their respective sections.

PART COMPOSITION M.P.R.

Part assembled with:

  • brake compensator bracket,

  • spare wheel support bearing.

Traverse centrale de plancher arrière

LIST OF LINKS:

Seat mounting reinforcement

PARTS CONCERNED (thickness in mm):

  1. Rear floor centre cross member 1.5

  2. Rear side member 1.5

  3. Rear suspension mounting box closing panel 1

    Traverse centrale de plancher arrière
    Traverse centrale de plancher arrière
    Traverse centrale de plancher arrière
    Renfort d’ancrage de siège

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.