Bodywork
Partial rear side member
In this manual: Bodywork
~1min read
INTRODUCTION
Replacing this part is a complementary operation to replacing the rear end cross member for a rear impact. This part can be partially replaced (see section and drawing below).
In the operation described below, you will only find descriptions of the joints specific to the part concerned.
Information on other parts is covered in their respective sections.
Use of the repair bench is essential.
PART COMPOSITION M.P.R.
Part assembled with:
rear side member reinforcement,
tie-down ring (left side),
rear side member extension.


PARTS CONCERNED (thickness in mm):
Rear side member 1.5




Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?