Rear floor cross member, front section

INTRODUCTION

Below you will find the specific procedure for vehicles fitted with a rear floor, rear section

INTRODUCTION

Replacing this part is a complementary operation to replacing the rocker panel closing panel for a side impact.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on other parts is covered in their respective sections.

This part can be partially replaced (see section drawing and procedure below).

PART COMPOSITION M.P.R.

Part only.

LIST OF LINKS:

Rear floor
Rocker panel closing panel, front section
Rocker panel closing panel, rear section

PARTS CONCERNED (thickness in mm):

1. 1

   Rear floor cross member, front section 0.8

2. 2

   Rear floor 1

3. 3

   Rocker panel closing panel, front section 1.2

4. 4

   Rear section sill closing panel 1.5