Bodywork

Front under-seat cross member

5steps
~30min
2/5difficulty
Done 0 of 5

INTRODUCTION

The replacement of this part is an operation following a side collision, complementary to the replacement of the sill closing panel.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on other parts is covered in their respective sections.

Use of the repair bench is essential.

PART COMPOSITION M.P.R.

Part assembled with front seat spacer.

Traverse sous-siège avant

LIST OF LINKS:

Side floor
Front side member rear section
Sill closing panel

PARTS CONCERNED (thickness in mm):

  1. Front under-seat cross member 1

  2. Floor pan 1

  3. Front side member rear section 1.8

  4. Sill closing panel 1.2

  5. Tunnel 1.2

    Traverse sous-siège avant
    Traverse sous-siège avant
    Traverse sous-siège avant
    Traverse sous-siège avant
    Traverse sous-siège avant
    Traverse sous-siège avant
    Plancher latéral

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.