Front side member closing panel

INTRODUCTION

This part can be replaced in two ways:

1. 1

   Complete front side member closing panel.

2. 2

   Partial front side member closing panel (see sectional diagram below).

This operation is performed by straightening or replacing the front side member. It is complementary to the front lower crossmember end and the wheel arch.

Consequently, links with these parts are not considered; they are covered in their respective sections.

M.P.R. PART COMPOSITION

Part only

LIST OF LINKS:

Front side member front section
Front front cradle support

PARTS CONCERNED (thickness in mm):

1. 1

   Front side member front section 1.5

2. 2

   Front front cradle support 1.2

3. 3

   Side member closing panel 1.2

4. 4

   Front front cradle support reinforcement 1