Front subframe support

INTRODUCTION

The replacement of this part is a basic operation for an underbody collision.

In the operation described below, you will only find descriptions of the joints specific to the part concerned.

Information on other parts is covered in their respective sections.

Use of the repair bench is essential.

PART COMPOSITION M.P.R.

Part assembled with front subframe support reinforcement.

LIST OF JOINTS:

Front side member front section
Front side member closing panel
Bonnet hinge support

PARTS CONCERNED (thickness in mm):

1. 1

   Front side member front section 1.5

2. 2

   Front front cradle support 1.2

3. 3

   Side member closing panel 1.2

4. 4

   Front front cradle support reinforcement 1

5. 5

   Bonnet hinge bracket 1.5