Rear floor unit

INTRODUCTION

Replacing this part is a supplementary operation to replacing the rear apron for a rear impact. In the operation described below, you will only find descriptions of the connections specific to the part concerned.

Information on other parts is covered in their respective sections.

Use of the repair bench is essential.

PART COMPOSITION M.P.R.

Part assembled with:

• rear end cross member,

• rear floor centre cross member,

• rear floor front cross member,

• rear floor,

• rear floor stiffener,

• complete rear side members

LIST OF LINKS:

Side floor
Transmission tunnel
Rocker panel closing element
Side panel lining
Rear wheel arch

PARTS CONCERNED (thickness in mm):

1. 1

   Side floor 0.8

2. 2

   Tunnel 1.2

3. 3

   Rear floor, rear section 1

4. 4

   Sill closing panel 1.2

5. 5

   Side panel inner 0.7

6. 6

   Wheel arch 1

7. 7

   Rear section sill closing panel 1.5

8. 8

   Rear floor cross member, front section 0.8

9. 9

   Side panel 0.8

10. 10

    Bump stop mounting reinforcement 1.5

11. 11

    Bump stop mounting 1.5

12. 12

    Upper shock absorber mounting reinforcement 1.2