Headrests/Front seats
Headrest A
To raise the headrest
Pull it upwards to the desired height.
To lower the headrest
Pull tab 2 forwards, lift the headrest slightly to release it, and guide it down to the desired height.
To remove the headrest
Raise it to its highest position. Press button 1 and lift the headrest to release it.
To refit the headrest
First, make sure the headrest posts are aligned and clean.
Pull tab 2 forwards.
Insert the headrest posts into the sleeves, notches facing forwards (tilt the backrest rearwards if necessary).
Guide the headrest down to the desired height.
Headrest B
Headrest B
To raise the headrest
Pull it upwards to the desired height.
To lower the headrest
Press button 3 and guide the headrest down to the desired height.
To remove the headrest
Raise it to its highest position. Press button 4 and lift the headrest to release it.
Note: when the headrest is removed, take care not to change the position of the posts.
To refit the headrest
If the post setting has been changed, pull the posts out fully. Make sure they are aligned and clean and, if you have difficulty, check that the notches face forwards.
Insert the headrest posts into the sleeves (tilt the backrest rearwards if necessary).
Push the headrest down until it locks, then press button 3 and push the headrest down fully.
! As the headrest is a safety item, make sure it is in place and correctly positioned: the top of the headrest should be as close as possible to the top of the head, and the distance between the head and the headrest should be minimal.
Headrest C
Headrest C
To raise the headrest
Pull it upwards to the desired height.
To lower the headrest
Press tab 5 and guide the headrest down to the desired height.
To remove the headrest
Raise it to its highest position. Press tabs 5 and 6 and lift the headrest to release it.
Note: when the headrest is removed, take care not to change the position of the posts.
To refit the headrest
Press tab 5.
Insert the headrest posts into the sleeves, notches facing forwards, and guide the headrest down to the desired height.
REAR HEADRESTS
Rear headrests
To raise it
Slide it to the desired position.
To lower it
Pull it towards you and slide it to the desired position.
To remove it
Raise the headrest, then press tabs 1 to release it.
To refit it
Press tab 1 and insert the posts into the sleeves, notches facing forwards.
Stowed position 2
Pull it towards you and lower it fully.
The fully lowered head restraint position is a stowage position: it must not be used when a passenger is seated in a rear seat.
! As the headrest is a safety item, make sure it is in place and correctly positioned.
Convertible child head restraint
When the vehicle is equipped with it, the child head restraint and its booster seat can only be installed in the outer rear seats.
For installation and use, refer to the equipment instructions.
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.