Renault Kangoo Quiz
Renault Kangoo Driver's Manual

Front seats

In this manual: Renault Kangoo Driver's Manual
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~3min read

Pour avancer ou reculer
To move forward or back

Depending on the seat, lift bar 1 or handle 4 to unlock. Once in the desired position, release the handle and make sure it is properly locked.

To adjust the driver's seat cushion height

Operate lever 3 as many times as necessary:

  • upward to raise the seat cushion;
  • downward to lower the seat cushion.

Pour incliner le dossier
To recline the seatback

Depending on the seat, lower or lift lever 2 and tilt the seatback to the desired position.

Siège chauffant
Heated seat

Moteur tournant, actionnez le contacteur 5, un voyant lumineux s’allume.Heated seat

With the engine running, press switch 5; an indicator light comes on.

! For safety reasons, make these vehicle adjustments with the vehicle stopped. To avoid affecting the effectiveness of the seat belts, we recommend not reclining the seatbacks too far. Make sure the seatbacks are properly locked. No objects must be placed on the floor (driver's footwell): in the event of hard braking, these objects could slide under the pedals and prevent their use.

Flat floor position

Position plancher plat
Flat floor position

Depending on the vehicle, the passenger seatback can fold down onto the seat cushion to obtain a flat floor position.

  • Hold handle 4 and move the seat fully rearward;
  • lower the head restraint fully;
  • hold the seatback at the top to prepare for lowering;
  • pull lever 2 and fold the seatback forward (the seat cushion positions itself on the floor);

! For safety reasons, make these vehicle adjustments with the vehicle stopped.

Position plancher plat
  • make sure no object prevents the seat from being operated;
  • tilt head restraint 5 so that it sits under the dashboard.

The seat locks automatically; make sure it is properly locked.

Maximum load on the seat in flat floor position: 80 kg, evenly distributed.

!! Make sure you hold the seatback when folding it flat. Risk of injury.

Returning the seat to position

Repositionnement du siège
Returning the seat to position

Make sure nothing prevents the seat from being operated.

  • Pull lever 2 and raise the seatback; make sure it is properly locked;
  • return the seat cushion to position by placing your hand on the front of the cushion.

When the rear bench is folded down, handle the front seats with care.

! Place your hand on the front of the seat cushion when returning it to position. Risk of pinching.

Front seats

Sièges avant
Front seats

Malfunction

(depending on vehicle)

If the sliding side door does not operate, lower control 6, hold the control while tilting the seatback, and slide the seat forward.

To return the seat to the comfort position, slide it rearward.

Adjust the seat and make sure it is properly locked.

! For safety reasons, make these vehicle adjustments with the vehicle stopped.

! To avoid any risk of injury, make sure no one is near moving parts. When handling the seat, make sure nothing obstructs the moving parts or their locking mechanism.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.