Electric headlight beam height adjustment

Electric headlight beam height adjustment

Wheel 1 is used to correct the headlight beam height according to the load.

Turn wheel 1 down to lower the headlights and up to raise them.

When the vehicle is unladen, wheel 1 must be set to 0.

When the vehicle is partially or fully loaded, the headlight beam must be adjusted to light the road between 50 and 100 metres ahead. Then use positions 1 to 4 of the wheel.

1. 1
   Incorrect setting: you are lighting too far ahead and risk dazzling other drivers.

   Turn the wheel downwards to lower the beam.

2. 2
   Correct setting: the maximum beam range is between 50 and 100 metres.