Electrical equipment
Deactivation switch
In this manual: Electrical equipment
~1min read
Essential equipment |
| diagnostic tool |
REMOVAL
IMPORTANTBefore removing any component of the safety system, lock the airbag control unit using the diagnostic tool. When this function is active, all firing circuits are inhibited and the airbag warning light on the instrument panel comes on steady (ignition on).

- Remove:
- the upper part of the front sill trim,
- the side panel (1) of the dashboard.
- Unclip the deactivation switch.
INSTALLATION
- Refit in the reverse order of removal.
Check the airbag ECU using the diagnostic tool.
- If everything is correct, unlock the airbag control unit; otherwise, refer to the diagnostic manual.
- Check operation:
- of the switch,
- of the "airbag OFF" indicator.
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?