Interior Light

ECU Terminals

~6min read

ECU TERMINALS

*A

Main Body ECU (Multiplex Network Body ECU) with 1 connector

-

-

*A

Main Body ECU (Multiplex Network Body ECU) with 2 connectors

-

-

CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Disconnect the connectors from the instrument panel junction block assembly and the main body ECU (multiplex network body ECU).

(b) Measure the voltage and resistance according to the value(s) specified in the table below.

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

3F-1 - Body Ground

W - Body Ground

Battery power supply

Always

11 à 14 V

3K-1 - Body Ground

B-R - Body Ground

Battery power supply

Always

11 à 14 V

3D-3 - Body Ground

W-B - Body ground

Ground

Always

Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness.

(c) Reconnect the connectors of the instrument panel junction block assembly and the main body ECU (multiplex network body ECU).

(d) Measure the voltage and check the pulses according to the value(s) in the table below.

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

3A-30 - Body ground

LG - Body ground *1

G - Body ground*2

ACC power supply

Ignition Switch in ACC position

11 à 14 V

Ignition Switch in OFF position

Below 1 V

3A-17 - Body ground

GR - Body ground

IG power supply

Ignition Switch in ON position

11 à 14 V

Ignition Switch in OFF position

Below 1 V

3D-24*3 - Body ground

L - Body ground

Power supply to right door courtesy light

Always

11 à 14 V

3D-25*3 - Body ground

G - Body ground

Power supply to left door courtesy light

Always

11 à 14 V

3D-26*3 - Body ground

P - Body ground

Power supply to cup holder light No. 1

Always

11 à 14 V

3D-27*3 - Body ground

R - Body ground

Power supply to cup holder light No. 2

Always

11 à 14 V

3H-19 - Body ground

L - Body ground

Power supply to luggage compartment light No. 1

DOME CUT relay ON

11 à 14 V

DOME CUT relay OFF

Below 1 V

3D-9 - Body ground

W - Body Ground

Power supply to room light assembly, No. 1 dome light and courtesy light

DOME CUT relay ON

11 à 14 V

DOME CUT relay OFF

Below 1 V

3D-29 - Body ground

G - Body ground

Interior light control output

Interior light OFF (when activated by the lighting-on-open system)

11 à 14 V

Interior light ON (when activated by the lighting-on-open system)

Below 1 V

3H-24 - Body ground

BR - Body ground

Rear LH door courtesy light switch input

Rear LH door open

Below 1 V

Rear LH door closed

Pulse generation

3A-31 - Body ground

BR - Body ground

Rear RH door courtesy light switch input

Rear RH door open

Below 1 V

Rear RH door closed

Pulse generation

F15-6 (FLCY) - Body ground

R - Body ground

Front LH door courtesy light switch input

Front left door open

Below 1 V

Front left door closed

Pulse generation

F15-27 (FRCY) - Body ground

BR - Body ground

Front door right sill light switch input

Front right door open

Below 1 V

Front right door closed

Pulse generation

3D-14*1 - Body ground

LG - Body ground

Rear door unlock detection switch input

Rear door locked

Pulse generation

Rear door unlocked

Below 1 V

3D-13 - Body ground

B - Body ground

Front LH door unlock detection switch input

Front LH door locked

Pulse generation

Front LH door unlocked

Below 1 V

3D-12 - Body ground

GR - Body ground

Front RH door unlock detection switch input

Front RH door locked

Pulse generation

Front RH door unlocked

Below 1 V

F15-25 (BCYL) - Body ground

Y - Body Ground

Luggage compartment light No. 1 control output

Luggage compartment light No. 1 OFF

11 à 14 V

Luggage compartment light No. 1 ON

Below 1 V

3H-34 - Body ground

SB - Body ground

Luggage compartment door courtesy light switch input

Luggage compartment door open

Below 1 V

Luggage compartment door closed

11 à 14 V

If the result does not conform to the specifications, there may be a malfunction in the main body ECU (multiplex network body ECU) or the instrument panel junction block assembly.

  • *1: with Smart Key System
  • *2: Without smart key system
  • *3: With door courtesy light

INSPECT CERTIFICATION ECU (INTELLIGENT KEY ECU ASSEMBLY) (with Smart Key System)

(a) Measure the voltage according to the value(s) shown in the table below.

Terminal No. (Symbol)

Wire Color

Terminal Description

Condition

Specified Condition

F1-10 (SWIL) - F1-11 (AGND)

LG - P

Engine switch light control output

Engine switch light ON

11 à 14 V

Engine switch light OFF

Below 1 V

  • If the result is not as specified, the certification ECU (intelligent key ECU assembly) may be defective.