Interior Light

System Description

~5min read

SYSTEM DESCRIPTION

ILLUMINATED ENTRY SYSTEM

(a) The illuminated entry system has the following control functions:

Control

General Description

Lights that operate

Linked to operation area*1

When a registered key is placed in an exterior detection area of the vehicle around the doors, the items listed on the right turn on.

  • Reading Light Assembly
  • Dome light assembly No. 1

Linked to Door Lock/Unlock

When any door is unlocked, the operating lights turn on.

  • Reading Light Assembly
  • Dome light assembly No. 1
  • Interior light assembly No. 1 (door courtesy light)*3
  • Instrument cluster finish panel garnish (cup holder light)*3

When all doors are locked, the operating lights turn off.

Linked to door opening/closing

When any door is opened, the operating lights turn on.

  • Reading Light Assembly
  • Dome light assembly No. 1
  • Interior light assembly No. 1 (door courtesy light)*3
  • Instrument cluster finish panel garnish (cup holder light)*3
  • Engine switch illumination*1

When the ignition switch is in ACC or ON and all doors are closed, the operating lights turn off.

  • Reading Light Assembly
  • Dome light assembly No. 1

Linked to engine switch*1

When the engine switch is moved from ON (ACC or IG) to OFF, the operating light turns on.

  • Reading Light Assembly
  • Dome light assembly No. 1

Linked to ignition switch*2

When the ignition switch is moved from ACC or ON to OFF, the operating lights turn on.

  • Reading Light Assembly
  • Dome light assembly No. 1

Linked to engaged shift position*3

When the shift lever is moved from P to any other position, the operating lights dim.

  • Interior light assembly No. 1 (door courtesy light)*3
  • Instrument cluster finish panel garnish (cup holder light)*3

Delay

After approximately 15 seconds have elapsed following the occurrence of the following condition, the operating lights turn off (*1):

  • A function linked to the operation area is used.
  • Reading Light Assembly
  • Dome light assembly No. 1

After approximately 15 seconds have elapsed following the occurrence of the following condition, the operating lights turn off:

  • A function linked to the engine switch is used.*1
  • A function linked to the ignition switch is used.*2
  • Reading Light Assembly
  • Dome light assembly No. 1
  • Interior light assembly No. 1 (door courtesy light)*3
  • Instrument cluster finish panel garnish (cup holder light)*3

After approximately 15 seconds have elapsed following the occurrence of any of the following conditions, the operating lights turn off:

  • The function linked to door unlocking is activated.
  • A door is opened, then all doors are closed while the ignition switch is in OFF.
  • Reading Light Assembly
  • Dome light assembly No. 1
  • Interior light assembly No. 1 (door courtesy light)*3
  • Instrument cluster finish panel garnish (cup holder light)*3
  • *1: with Smart Key System
  • *2: Without smart key system
  • *3: With door courtesy light

BATTERY SAVER CONTROL SYSTEM

(a) The battery saver control system has the following control functions:

Control

General Description

Lights that operate

Basic function

When 20 minutes have elapsed after the ignition switch was moved from ACC or ON to OFF and the operating lights have remained on, the lights turn off.

HINT:

Battery saver control is canceled when any of the following operations is performed before the lights turn off via battery saver control. Once the operation is performed, the lights remain on for 20 minutes, then the lights turn off.

  • The ignition switch is set to ACC or ON.
  • Any door is opened and then closed.
  • The luggage compartment door is opened and closed.
  • One of the doors is unlocked.
  • The key enters an exterior operation area.
  • Reading Light Assembly
  • Dome light assembly No. 1
  • Interior light assembly No. 1 (door courtesy light)*1
  • Instrument cluster finish panel garnish (cup holder light)*1
  • Engine switch illumination*2

Automatic interior light cut-off function

When 20 minutes have elapsed after the ignition switch was moved from ACC or ON to OFF and the operating lights have remained on, the lights turn off.

HINT:

Battery saver control is canceled when any of the following operations is performed before the lights turn off via battery saver control. Once the operation is performed, the lights remain on for 20 minutes, then the lights turn off.

  • The ignition switch is set to ACC or ON.
  • Reading Light Assembly
  • Dome light assembly No. 1
  • Luggage compartment light assembly No. 1
  • Courtesy light assembly
  • *1: With door courtesy light
  • *2: with Smart Key System