Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the following table, the values listed under "Normal Condition" are reference values. Do not rely solely on these reference values to determine whether a part is faulty or not.
HINT:
The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menus: Body Electrical / Main Body / Data List.
(e) Read the Data List by following the instructions on the Techstream.
Body Electrical > Main Body > Data ListTester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
ACC SW |
Ignition Switch ACC Position Signal |
OFF or ON |
ON: Ignition switch in ACC position. OFF: Ignition switch in OFF position |
- |
IG SW |
Ignition Switch ON Position Signal |
OFF or ON |
ON: Ignition switch in ON position OFF: Ignition switch in OFF position |
- |
RR Door Courtesy SW |
Rear RH Door Sill Light Switch Assembly Signal |
OFF or ON |
ON: Right rear door open. OFF: Right rear door closed. |
- |
RL Door Courtesy SW |
Rear LH Door Sill Light Switch Assembly Signal |
OFF or ON |
ON: Left rear door open. OFF: Left rear door closed. |
- |
Back Door Courtesy SW |
Back Door Courtesy SW |
OFF or ON |
ON: Back door open. OFF: Back door closed. |
- |
FR Door Lock Pos |
Front Right Door Unlock Detection Switch Signal |
LOCK or UNLOCK |
LOCK: Front right door locked. UNLOCK: Front right door unlocked. |
- |
FR Door Courtesy SW |
Front RH Door Welcome Light Switch Assembly Signal |
OFF or ON |
ON: Front RH door open OFF: Front RH door closed |
- |
FL Door Lock Pos |
Front Left Door Unlock Detection Switch Signal |
LOCK or UNLOCK |
LOCK: Front left door locked. UNLOCK: Front left door unlocked. |
- |
FL Door Courtesy SW |
Front LH Door Welcome Light Switch Assembly Signal |
OFF or ON |
ON: Front left door open OFF: Front left door closed |
- |
RR-Door Lock Pos SW |
Rear Left and Right Door Unlock Detection Switch Signal |
OFF or ON |
ON: Rear right or left door unlocked. OFF: Rear right and left doors locked. |
- |
RL-Door Lock Pos SW |
Rear Left and Right Door Unlock Detection Switch Signal |
OFF or ON |
ON: Rear right or left door unlocked. OFF: Rear right and left doors locked. |
- |
Interior Light Control |
Illuminated Entry System Operation |
OFF or ON |
Customized value is displayed |
- |
I/L ON W/Door Key Unlock |
Function that turns on the interior lights when the doors are unlocked |
OFF or ON |
Customized value is displayed |
- |
Lighting Time |
Timer control function illumination time (illuminated entry system) |
15s, 7.5s or 30s |
Customized value is displayed |
- |
Room Light when Aprchd |
Function that turns on the interior lights when the key is in one of the operating areas |
OFF or ON |
Customized value is displayed |
- |
I/L when ACC OFF |
Function that turns on the interior lights when the ignition switch is turned from ACC or IG to OFF |
OFF or ON |
Customized value is displayed |
- |
Light Control |
Function that turns on the ambient light (while driving) |
OFF or ON |
Customized value is displayed |
- |
Interior Illumination Light |
Function that turns on the ambient light (at all times) |
OFF or ON |
Customized value is displayed |
- |
ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing parts. This non-intrusive functional check can be very useful, because intermittent operation can be identified before parts or wiring are moved. Performing Active Tests at the start of troubleshooting saves time during diagnosis. Data List information can be displayed during Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menu items: Body Electrical / (desired system) / Active Test.
(e) Perform the Active Test by following the Techstream instructions.
Body Electrical > Main Body > Active TestTester display | Item | Control Range | Diagnostic Note |
|---|---|---|---|
Illuminated Entry System |
Turns on the lights controlled by the illuminated entry system*1 |
ON or OFF |
Perform the Active Test with the reading light assembly door switch in the ON position. |
Relay for Interior Light Auto Cut Function |
DOME CUT Relay |
ON or OFF |
|
Interior Illumination Light1 |
|
ON or OFF |
Preconditions for using the Active Test to control the light controlled by the high beam/low beam switch:
|
Interior Illumination Light2 |
|
ON or OFF |
Preconditions for using the Active Test to control the light controlled by the high beam/low beam switch:
|
*1: Refer to the Description section for lights controlled by the illuminated entry system.
Click here![]()
*2: With door courtesy light
Body Electrical > Smart Key > Active TestTester display | Item | Control Range | Diagnostic Note |
|---|---|---|---|
Power/Engine SW Light |
Engine Switch Light*1 |
OFF or ON |
When performing the Active Test, make sure the following condition is met: Engine switch light is OFF (at least 15 seconds have elapsed since the engine switch was changed from ON to OFF) and the engine switch is ON (ACC or IG) or the engine is running. |
*1: with Smart Key System