Toyota Corolla Quiz
Fuel and Exhaust Systems

Fuel Pump Removal and Installation

In this manual: Fuel and Exhaust Systems
Owner's Manual — 7Controls and Instruments — 49Engine Starting and Vehicle Operation — 5Actions if the Engine Does Not Start — 18Maintenance — 30Gasoline Engines - Repair Procedures Without Engine Removal from Vehicle — 17Gasoline Engines - Removal and Overhaul — 21Diesel Engine — 26Engine Electrical Equipment — 13Cooling and Heating Systems — 17Fuel and Exhaust Systems — 14Emission Control System — 19Manual transmission — 6Automatic transmission — 9Clutch and Axle Shafts — 11Brake System — 20Suspension and Steering — 24Body — 29Electrical System — 24Wiring Diagrams — 24
~1min read

PROCEDURE
1. Remove the fuel tank.
2. Disconnect the battery ground cable.
3. Working from the passenger compartment, remove the rear seat (see subsection 11.18).

4. Снимите крышку лючка топливного насоса и датчика уровня топлива (указаны стрелками).

4. Remove the fuel pump and fuel level sensor access cover (indicated by arrows).

5. Отсоедините разъем. Отсоедините трубки бензопровода.

5. Disconnect the connector. Disconnect the fuel lines.

6. Отверните болты крепления топливного насоса и датчика уровня топлива (указаны

6. Remove the bolts securing the fuel pump and fuel level sensor (indicated by arrows).

7. Осторожно достаньте из топливного бака топливный насос в сборе с датчиком.

7. Carefully remove the fuel pump assembly with the sensor from the fuel tank.

8. Осторожно поддев нижнюю часть насоса достаньте насос из кронштейна.

8. Carefully pry up the bottom of the pump and remove the pump from the bracket.
9. Installation is performed in the reverse order.

Test yourself

A quick Toyota Corolla quiz: every answer comes with an explanation and a link to the manual page.