Air conditioning with R134a refrigerant

Air conditioning service and recycling units

~2min read

Air conditioning service units for extracting, cleaning and charging refrigerant in automotive air conditioning systems are currently offered on the market by various manufacturers.

Classification of extraction and filling systems into groups

Group 3:

Mobile extraction and filling systems for filling pressurized gas cylinders that are permanently attached to the system.

The refrigerant or refrigerant/oil mixture is filled into pressurized gas cylinders that are permanently attached to the mobile systems. According to Section 3 (5) No. 3 of the Pressure Vessel Ordinance, in this case the pressurized gas cylinders are treated as equivalent to pressure vessels.

The filling systems require:

  • no permit
  • no inspection by an expert, because the gas is filled into pressurized gas cylinders that are treated as equivalent to pressure vessels. (For the system used to fill gas from these pressure vessels into pressurized gas cylinders for supply to others, a permit is again required and it is subject to the inspection obligation.)


Note

The air conditioning service and recycling units used in motor vehicle workshops are extraction and filling systems that do not require a permit (Group 3) and may only be operated by qualified personnel. Operation and maintenance of the units must be taken from the respective manufacturer's documentation.

Filling systems not requiring a permit

Filling systems not requiring a permit are filling systems in which compressed gases are filled into mobile pressurized gas cylinders exclusively for use within the company's own operations.

Note:

Some refrigerant service units are not subject to approval-requiring filling systems. When working with these units, the refrigerant is not filled into portable pressurized gas cylinders but into a permanently installed filling cylinder with a visible fill-level indicator and float switch.

Recommendation:

When drawing off surplus refrigerant for in-house use, it is recommended to use a portable filling cylinder with a visible fill-level indicator and overpressure valve.

When handling compressed gases and when transferring them into other pressurized gas containers, various technical rules (e.g. TRGS 400, TRGS 402, TRGS 407, TRGS 510, TRBS 3145 / TRGS 725) must be observed.

Repair notes for the refrigerant circuit


WARNING!

When working on the refrigerant circuit, the generally applicable safety regulations and the German Pressure Vessel Ordinance (DruckbehälterVerordnung) must be observed.


Caution!

Tools or materials that are not approved (e.g. leak-stop additives) can cause damage to or impairment of the system.

Only tools and materials approved by the manufacturer may be used.

If tools or materials that are not approved have been used, no warranty applies.

Special tools and accessories:

To be able to carry out proper and professional repairs on an air conditioning system:

  • If special tools and materials are required, a list can be found at.
  • Observe the basic notes on the leak detector.
  • Technical expertise is required.


Note

Releasing refrigerant into the environment is not permitted.