Seats

Removal of Front Seats
PROCEDURE

Remove the caps on the inner guide rail strip, pull the strip rearward.

Manually adjusted seats: remove the front locking bolt on the center guide rail.

Power-adjusted seats: remove the trim at the front on the left and right slides and remove the bolts located under it.

Lift the seat at the front, open the cable harness strap, disconnect the plug connectors.

All models: remove the seat by pulling it rearward.

Before installation, check that the so-called sliders on the outside of the seat supports and at the front center are not damaged. Otherwise the seat will rock.

Removal of front seats: unscrew the locking bolt (arrow) at the front under the seat.

Removal of Rear Seat
PROCEDURE

Removal of seat cushion: remove the two Phillips-head bolts at the front of the seat.

Lift the seat cushion upward to remove it.

Removal of seatback: fold the left side of the seatback forward.

Remove the strip on the center hinge of the right side of the seatback.

Loosen the Phillips-head bolts located under it.

Remove the right side of the seatback from the guide sideways.

Removal of the left side of the seatback is performed in the same way.