Cabin Air Filter Replacement
GENERAL The dust and pollen filter in the cabin ventilation and heating system is located at the right cabin air intake duct in the drain channel under the cover. If airflow into the cabin has noticeably decreased, replace the filter earlier than specified in the maintenance schedule.
Replacement is performed in the following sequence:
PROCEDURE
1. Open the hood.

2. Pull the rubber seal up from the body groove toward the center of the vehicle.

3. Swing up the movable element (A) of the drain channel cover.
4. Press in the 2 retainers (B). Note: One of the retainers is hidden in the illustration.
5. Remove the filter (C). Installation

6. Insert the new filter element into the frame (B) so that the arrows (A) point down.
7. Swing the cover (A) down and secure the tabs (B), refer to
3.
8. Place the rubber seal into the body groove.
CAUTION
The drain channel cover must be installed correctly. Otherwise, water may enter the heating system and the passenger compartment.Test yourself
A quick Audi A3 quiz: every answer comes with an explanation and a link to the manual page.