Driving the Vehicle

CMBS Switch

~1min read
Для выключения системы CMBS необходимо нажать и удерживать выключатель системы,

To turn off the CMBS, press and hold the system switch located below the air vent on the driver's side until a beep sounds. As a reminder that the system is off, the CMBS malfunction indicator illuminates on the instrument panel and the message (CMBS OFF) appears on the multi-information display. To turn the system back on, press and hold the switch until a short beep sounds.

When the ignition switch is turned to the ON (II) position again, the system will remain in the previously selected mode, i.e., it will remain on or off.

If the system was turned off using the switch, the CMBS indicator will illuminate and remain on, reminding you that the CMBS is off.

Test yourself

A quick Honda CR-V quiz: every answer comes with an explanation and a link to the manual page.