Hyundai Accent Quiz
Fuel system

Fuel Injectors

In this manual: Fuel system
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read
Топливные форсунки на основании сигналов от блока ЕСМ впрыскивают топливо в цилиндры

Fuel injectors inject fuel into the engine cylinders based on signals from the ECM. The amount of fuel supplied depends on the injector opening time, i.e., on the pulse width of the voltage applied to the injector solenoid.

Inspection

PROCEDURE

1. При работе двигателя на холостом ходу стетоскопом или пальцем руки проверьте

1. With the engine idling, check the operation of the injectors by listening for clicking with a stethoscope or by placing a finger on them.
2. If there is no clicking, check that the connectors to the injectors are securely connected and check the output voltage of the control unit.

3. Отсоедините разъем от топливной форсунки и измерьте сопротивление между контактами

3. Disconnect the connector from the fuel injector and measure the resistance between the connector terminals.

Resistance: 15.9 ± 0.35 Ω

4. Connect the connector to the fuel injector.

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.