Hyundai Accent Quiz
Brake System

Installation

In this manual: Brake System
Owner's Manual — 155SOHC Engines — 75DOHC Engines — 49Lubrication System — 14Cooling System — 23Emission Control — 3PCV Valve — 5Fuel system — 44Ignition System — 12Clutch — 17Manual transmission — 14Automatic transmission — 24Axle Shafts and Drive Shafts — 17Suspension — 31Steering — 45Brake System — 39Body — 23Air Conditioning System — 32Electrical Equipment — 54Appendix — 9Wiring Diagrams — 3
~1min read

PROCEDURE

1. Install the brake pad retaining clips.

2. Установите тормозные колодки на каждый зажим тормозных колодок.

2. Install the brake pads on each retaining clip.

Install the brake pad with the wear indicator on the piston side.

3. Специальным инструментом 09581–11000 вдавите поршень в цилиндр суппорта.

3. Using special service tool 09581–11000, push the piston into the caliper cylinder.

4. Установите новые тормозные колодки.

4. Install the new brake pads.

Never apply grease to the brake disc or brake pads.

5. Вверните болт и затяните его требуемым моментом.

5. Install the bolt and tighten it to the specified torque.
Tightening torque: 22–32 N•m

Test yourself

A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.