Electrical Equipment
Wiper Auto-Stop Check (Park Position)
In this manual: Electrical Equipment
~1min read
PROCEDURE
1. Turn the wiper motor on at low speed.
2. With the wire disconnected from terminal 3 of the connector, stop the motor at any position other than the park position.
3. Connect terminals 3 and 5 of the connector.
4. Using jumper wires, connect the battery positive terminal to terminal 6 of the connector and the battery negative terminal to terminal 1.

5. Check that the wiper motor stops when the wiper blades are in the park position.
Test yourself
A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?