Kia Cadenza VG Owner's Manual Quiz
Engine Control System/Fuel System

Injector Driver Box (IDB) Repair Procedures

In this manual: Engine Control System/Fuel System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
6steps
~36min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the injector driver box (IDB) connector (A).
  3. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner")
  4. Remove the main wiring harness (B) by loosening the nut (A).
  5. Remove the IDB bracket assembly (B) after loosening the bolts (A).
  6. Remove the IDB from the bracket after loosening the mounting bolts (A).

Installation

  1. Install in the reverse order of removal. IDB mounting bolt: 9.8 ~ 11.8 N·m IDB bracket mounting bolt (on vehicle): 18.6 ~ 24 N·m

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.