brake system

Components and Components Location

COMPONENTS LOCATION

repair procedures

expansion

1. 1

   Disconnect the brake fluid level sensor connector (A) and remove the reservoir cap.

   

2. 2

   Remove the front/rear wheels and tires.

   Tightening torque: 107.9 ~ 128 N·m

   

3. 3

   Remove the brake hose clamp (A).

4. 4

   Loosen the flare nut (B) and remove the brake line.

   Tightening torque: 13.7~16.7 N·m

   

   

5. 5

   Loosen the bolt (A) and remove the brake hose from the caliper.

   Tightening torque: 24.5~29 N·m

   

   

TEST

1. 1

   Inspect the brake lines for cracks, kinks, and corrosion.

2. 2

   Check the brake hoses for cracks, damage, and fluid leaks.

3. 3

   Check the brake line flare nuts for damage and fluid leaks.

4. 4

   Inspect the brake hose mounting bracket for cracks or deformation.

Installation

1. 1

   Installation is the reverse of removal.

2. 2

   After installation, bleed the brake system.

   (Refer to Brake System - "Brake System")

3. 3

   Check for spilled brake fluid.