master cylinder

Components and Components Location

COMPONENTS LOCATION

repair procedures

expansion

1. 1

   Remove the battery and battery tray from the vehicle.

   D 1.6 U2 TCI (Refer to Engine Electrical System - "Battery")

   G 1.0 T-GDI (Refer to Engine Electrical - "Battery")

   G 1.2 MGI (Refer to Engine Electrical - "Battery")

   G 1.4 MPI (Refer to Section EE - "Battery")

2. 2

   Remove the air cleaner assembly.

   D 1.6 U2 TCI (Refer to Engine Mechanical - "Air Cleaner")

   G 1.0 T-GDI (Refer to Engine Mechanical - "Air Filter")

   G 1.2 MPI (Refer to Engine Mechanical - "Air Cleaner")

   G 1.4 MPI (Refer to Engine Mechanical - "Air Cleaner")

3. 3

   Suck out the brake fluid from the reservoir with a suitable pump/syringe

4. 4

   Disconnect the brake fluid level switch connector (A) and disconnect the brake hose (B) from the master cylinder by loosening the flare nut.

   Tightening torque.

   ABS: 13.7–16.7 N·m

   ESC: 18,6–23 N·m

   

5. 5

   Remove the master cylinder (B) from the brake booster after loosening and removing the mounting nuts (A).

   Tightening torque: 9.8~15.7 N·m

   

Installation

1. 1

   Installation is the reverse of removal.

2. 2

   After installation, bleed the brake system.

   (Refer to Brake System - "Brake System")