Audio Remote Control

Components and Components Location

COMPONENTS LOCATION

Schematic diagrams

Circuit diagram

[Audio]

[Audio + Bluetooth]

[Audio + Bluetooth + Voice]

[Trip]

[Trip meter + ACC (2 buttons)]

[Trip meter + ACC + SLD (2 buttons)]

[Trip meter + ACC (4 buttons)]

[Trip meter + ACC + SLD (4 buttons)]

repair procedures

expansion

1. 1

   Disconnect the battery ground cable.

2. 2

   Remove the steering wheel.

   (Refer to Steering - "Steering Wheel")

3. 3

   Loosen the mounting screws and remove the steering wheel remote control (A).

   (LH)

   

   

   (RH)

   

   

4. 4

   Disconnect the remote control connector on the steering wheel (A).

   (LH)

   

   (RH)

   

Installation

1. 1

   Connect the remote control switch connector on the steering wheel.

2. 2

   Install the remote control on the steering wheel.

3. 3

   Install the steering wheel and the driver airbag module.

4. 4

   Connect the negative (-) battery terminal.

TEST

1. 1

   Check the resistance between the terminals at each switch position (LH).

   

   [LH: Audio + Hands-free + Voice]

   Switch	Clamp	Resistance (±3%)
   Preset	1,6	430 Ω
   SEEK		1.11 kΩ
   MODE		2.11 kΩ
   MUTE		3.11 kΩ
   VOL (-)		4.61 kΩ
   VOL (-)		6.81 kΩ
   VOICE		10.71 kΩ
   End		18.91 kΩ
   SEND		40.91 kΩ

2. 2

   Check the resistance between the terminals at each switch position (RH).

   

   [RH: Cruise control + Trip computer]

   Switch	Clamp	Resistance (±3%)
   Cancel	2,6	390 Ω
   SET/-		610 Ω
   RES/+		910 Ω
   Cruise control ON/OFF		1.38 kΩ
   Cruise control and speed limiter ON/OFF Cruise control mode		2.13 kΩ
   Track	1,6	390 Ω
   Trip meter up		610 Ω
   Trip meter down		910 Ω
   OK/Default		1.38 kΩ