Engine Starting System
Oil Pressure Warning Switch
In this manual: Engine Starting System
~1min read
Removal
PROCEDURE
1. Raise the front of the vehicle and support it on stands.
2. Disconnect the battery ground.
3. Disconnect the connector from the switch (the switch is located at the rear right of the cylinder block).
4. Unscrew the switch, remove the gasket and immediately plug the opening.
Installation
PROCEDURE
1. Replace the gasket or apply sealant to the switch threads.
2. Screw in the switch and connect the wire.
3. Lower the vehicle and restore the oil level.
Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?