Engine Starting System
Starter
In this manual: Engine Starting System
~1min read
Removal
PROCEDURE
1. Disconnect the battery ground cable.
2. Raise the front of the vehicle and support it on stands.
3. Loosen the bolts and move the exhaust manifold bracket aside.

4. Disconnect the power cable and the solenoid control wire from the solenoid (as indicated by the arrows).
5. Remove the bolts and remove the starter.
6. If necessary, turn the wheels fully to the stop.
Installation: Installation is performed in the reverse order.
Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?