Electrical System

Windshield Wiper Motor

~1min read

Removal and installation

PROCEDURE

1. Disconnect the battery ground cable.

2. Open the hood.

3. Remove the seal from the engine compartment partition cover.

4. Отверните винты, достаньте защелки и снимите кожух.

4. Remove the screws, release the clips and remove the cover.

5. Отсоедините разъем электродвигателя.

5. Disconnect the motor connector.

6. Отверните гайку оси электродвигателя (указана стрелкой на фото слева) и снимите

6. Remove the motor shaft nut (shown by arrow in the left photo) and remove the washer (right photo).

7. Remove the bolts and remove the motor.

8. Install in the reverse order of removal.

Test yourself

A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.