Electrical System
Radio
In this manual: Electrical System
~1min read
GENERAL INFORMATION
WARNING: Make sure you know the radio security code.Removal and installation
PROCEDURE
1. Disconnect the battery ground cable.
2. Remove the center panel.
3. Remove the radio mounting screws.

4. Pull the radio toward you.

5. Disconnect the connector and the antenna plug.
6. The radio fuse is located inside the bayonet connector.
7. Install the radio in the reverse order of removal.
Test yourself
A quick Nissan Sunny quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?