Parking Assist / Monitor System
Blind spot monitor slave module (C1AB7)
In this manual: Parking Assist / Monitor System
~1min read
DESCRIPTION
This DTC is stored when the right blind spot monitor sensor (slave) detects an internal malfunction.
DTC No. | Detection Item | DTC Detection Condition | Suspected Area |
|---|---|---|---|
C1AB7 |
Blind spot monitor slave module |
The right blind spot monitor sensor (slave) detects an internal malfunction |
Right Blind Spot Sensor (Slave) |
PRECAUTION / NOTICE / HINT
NOTICE:
When checking DTCs, make sure the blind spot monitor system is ON.
PROCEDURE
CHECK DTCs
(a) Turn the ignition switch OFF.
(b) Turn the ignition switch to ON.
(c) Check whether other DTCs are output and check whether the same DTC is output again.
Body Electrical > Blind Spot Monitor Slave > Trouble CodesOK:
No DTC is output.
| OK | USE SIMULATION METHOD TO CHECK |
| NG | REPLACE RIGHT (SUB) BLIND SPOT MONITOR SENSOR |
Was this page helpful?