Parking Assist / Monitor System
Check / Clear DTCs
In this manual: Parking Assist / Monitor System
~1min read
CHECK / CLEAR DTCs
CHECK DTCs
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Set the blind spot monitor system to ON.
(d) Turn on the Techstream.
(e) Select the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Trouble Codes.
HINT:
The right (slave) and left (master) blind spot monitor sensors output DTCs. Therefore, check the DTCs for both blind spot monitor sensors.
Body Electrical > Blind Spot Monitor Master > Trouble Codes Body Electrical > Blind Spot Monitor Slave > Trouble Codes(f) Check DTCs.
Click here![]()
CLEAR DTCs
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Set the blind spot monitor system to ON.
(d) Turn on the Techstream.
(e) Select the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Trouble Codes.
Body Electrical > Blind Spot Monitor Master > Clear DTCs Body Electrical > Blind Spot Monitor Slave > Clear DTCs(f) Clear DTCs.
Was this page helpful?