Symptom Table
SYMPTOM TROUBLESHOOTING TABLE
HINT:
- Use the table below to determine the cause of the symptoms. If several suspected areas are listed, the possible causes of the symptom are shown in order of probability in the "Suspected Area" column of the table. Check each symptom, verifying the suspected areas in the order listed. Replace parts if necessary.
- Check the fuses and relays associated with this system before checking the suspected areas listed below.
Symptom | Suspected Area | Link |
|---|---|---|
The system does not function at all |
Follow the "Power Source Circuit" procedure |
|
CAN communication system |
||
Left Blind Spot Sensor (Master) |
||
The system cannot be turned off |
CAN communication system |
|
Left Blind Spot Sensor (Master) |
||
The message "Blind Spot Monitor Unavailable" or "Blind Spot Monitor System Malfunction Visit Your Dealer" is displayed on the multi-information display |
Check DTC history |
|
Right Blind Spot Sensor (Slave) |
||
Left Blind Spot Sensor (Master) |
||
Combination meter assembly |
Symptom | Suspected Area | Link |
|---|---|---|
The right outside rear view mirror indicator does not light up |
Go to the "Blind Spot Monitor Beam Axis Confirmation" procedure |
|
Right outside rear view mirror |
||
RH outside rear view mirror assembly |
||
Right Blind Spot Sensor (Slave) |
||
The left outside rear view mirror indicator does not light up |
Go to the "Blind Spot Monitor Beam Axis Confirmation" procedure |
|
Left outside rear view mirror |
||
LH outside rear view mirror assembly |
||
Left Blind Spot Sensor (Master) |
||
The right outside rear view mirror indicator stays on |
Go to the "Blind Spot Monitor Beam Axis Confirmation" procedure |
|
Right Blind Spot Sensor (Slave) |
||
The left outside rear view mirror indicator stays on |
Go to the "Blind Spot Monitor Beam Axis Confirmation" procedure |
|
Left Blind Spot Sensor (Master) |
||
The right outside rear view mirror indicator does not flash |
Go to "Turn Signal Indicator" in the symptom table for the Lighting (EXT) section |
|
Right Blind Spot Sensor (Slave) |
||
The left outside rear view mirror indicator does not flash |
Go to "Turn Signal Indicator" in the symptom table for the Lighting (EXT) section |
|
Left Blind Spot Sensor (Master) |
||
The right outside rear view mirror indicator keeps flashing |
Right Blind Spot Sensor (Slave) |
|
The left outside rear view mirror indicator keeps flashing |
Left Blind Spot Sensor (Master) |
Symptom | Suspected Area | Link |
|---|---|---|
The function does not work at all (The blind spot monitor function operates normally) |
Data List / Active Test (Reverse) |
|
Continuously Variable Transaxle System (for K114) |
||
Right Blind Spot Sensor (Slave) |
.gif)