Parking Assist / Monitor System

Customizable Parameters

~1min read

CUSTOMIZABLE PARAMETERS

CUSTOMIZING THE BLIND SPOT MONITOR SYSTEM

(a) Customizing using the Techstream

NOTICE:

  • When the customer requests a change to a function, first make sure that the function can be customized.
  • Be sure to record the initial settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to its default value.

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch ON.

(3) Turn the blind spot monitor system ON.

(4) Turn on the Techstream.

(5) Select the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Utility / Warning.

(6) Select the setting by referring to the table below.

Alarm

Tester display

Description

Default setting

Setting

ECU

BSM Buzzer Volume Adjust

Adjusts the volume of the RCTA buzzer (blind spot monitor buzzer).

Medium

001:Low,011:Medium,101:High

Left Blind Spot Sensor (Master)

BSM Mirror Indicator Brightness

Adjusts the brightness of the indicators in the outside rearview mirror assemblies.

Bright

001:Dark,101:Bright

Left Blind Spot Sensor (Master)

RCTA Function

Turns the RCTA function on and off.

ON

0: ON position, 1: OFF position

Right Blind Spot Sensor (Slave)