Headlight aim
Vertical movement adjusting bolts

- Adjustment bolt A
- Adjustment bolt B
Before Checking the Headlight Aim
To properly check the headlight aim on your Toyota Prius 2024, follow these steps:
1. Ensure the vehicle has a full tank of gasoline.
2. Confirm the area around the headlight is not deformed.
3. Park the vehicle on level ground.
4. Make sure the tire inflation pressure is at the specified level.
5. Have someone sit in the driver's seat.
6. Bounce the vehicle several times to settle the suspension.
Adjusting the headlight aim
- Using a Phillips-head screwdriver, turn bolt A in either direction.
Remember the turning direction and the number of turns.

- Turn bolt B the same number of turns and in the same direction as step 1.
If the headlight cannot be adjusted using this procedure, take the vehicle to your Toyota dealer to adjust the headlight aim.

Exterior lights
If any exterior light does not turn on, have it replaced by your Toyota dealer.
LED lights
The lights consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the light lens does not indicate a malfunction. Contact your Toyota dealer for more information in the following situations:
- Large drops of water have built up on the inside of the lens.
- Water has built up inside the light.