BSM (Blind Spot Monitor)

In this manual: BSM (Blind Spot Monitor)
Instrument panel — 1Switches — 1Toyota Prius Interior — 1What to do if... — 1Before driving — 1Seat belts — 1SRS airbags — 1Toyota Prius Front passenger occupant classification system — 1Exhaust gas precautions — 1Child safety — 1Riding with children — 1Child restraint systems — 1Emergency assistance — 1System components — 1Safety Connect LED light Indicators — 1Safety information for Safety Connect — 1Hybrid system — 1Hybrid system features — 1Hybrid system precautions — 1Theft deterrent system — 1Warning lights and indicators — 1Warning lights — 1Indicators — 1Gauges and meters — 1Multi-information display — 1Display contents — 1Driving information display — 1Driving support system information display — 1Settings display — 1Energy monitor / consumption screen — 1System components — 1Consumption screen — 1Key information — 1Keys — 1Digital Key — 1Opening, closing and locking the doors — 1Side doors — 1Back door — 1Smart key system — 1Adjusting the seats — 1Front seats — 1Rear seats — 1Head restraints — 1Adjusting the steering wheel and mirrors — 1Steering wheel — 1Inside rear view mirror — 1Digital Rear-view Mirror — 1Outside rear view mirrors — 1Opening, closing the windows — 1Driving position memory — 1My Settings — 1Driving the vehicle — 1Cargo and luggage — 1Vehicle load limits — 1Power (ignition) switch — 1Toyota Prius EV drive mode — 1Transmission — 1Turn signal lever — 1Parking brake — 1Brake Hold — 1Operating the lights and wipers — 1Headlight switch — 1AHB (Automatic High Beam) — 1Windshield wipers and washer — 1Refueling — 1Using the driving support systems — 1Toyota Safety Sense 3.0 software update — 1Toyota Safety Sense 3.0215 — 1PCS (Pre-Collision System) — 1LTA (Lane Tracing Assist) — 1LCA (Lane Change Assist) — 1LDA (Lane Departure Alert) — 1PDA (Proactive driving assist) — 1FCTA (Front Cross Traffic Alert) — 1RSA (Road Sign Assist) — 1Dynamic radar cruise control — 1Cruise control — 1Emergency Driving Stop System — 1BSM (Blind Spot Monitor) — 1Safe Exit Assist — 1Intuitive parking assist — 1RCTA (Rear Cross Traffic Alert) function — 1RCD (Rear Camera Detection) function — 1PKSB (Parking Support Brake) — 1Parking Support Brake function (static objects to the front and rear/static objects around the vehicle) — 1Parking Support Brake function (rear-crossing vehicles) — 1Parking Support Brake function (rear pedestrians) — 1Toyota Teammate Advanced Park — 1Driving mode select switch — 1Driving assist systems — 1Driving tips — 1Hybrid Electric Vehicle driving tips — 1Winter driving tips — 1Using the air conditioning system and defogger — 1Automatic air conditioning system — 1Heated steering wheel/seat heaters/seat ventilators — 1Using the interior lights — 1Location of the interior lights — 1Operating the personal lights — 1List of storage features — 1Luggage compartment features — 1Other interior features — 1Garage door opener — 1Cleaning and protecting the vehicle exterior — 1Cleaning and protecting the vehicle interior — 1Maintenance requirements — 1General maintenance — 1Emission inspection and maintenance (I/M) programs — 1Do-it-yourself maintenance — 1Do-it-yourself service precautions — 1Hood — 1Positioning a floor jack — 1Engine compartment Toyota Prius 2024-2025 — 112-volt battery — 1Tire pressure warning system — 1Air conditioning filter — 1Cleaning the hybrid battery (traction battery) air intake vent — 1Electronic key battery — 1Checking and replacing fuses — 1Headlight aim — 1Emergency flashers — 1If your vehicle has to be stopped in an emergency — 1If the vehicle is submerged or water on the road is rising — 1If your vehicle needs to be towed — 1If a warning light turns on or a warning buzzer sounds — 1If a warning message is displayed — 1If you have a flat tire (vehicles without spare tire) — 1If you have a flat tire (vehicles with spare tire) — 1If the hybrid system will not start — 1If the electronic key does not operate properly — 1If the 12-volt battery is discharged — 1If your vehicle overheats — 1If the vehicle becomes stuck — 1Maintenance data (fuel, oil level, etc.) — 1Fuel information — 1Customization — 1
6steps
~36min
2/5difficulty
Done 0 of 6

The Blind Spot Monitor in the Toyota Prius utilizes rear side radar sensors, installed on the inner side of the left and right rear bumpers, to assist the driver in confirming safety when changing lanes. This advanced system enhances driving safety by detecting vehicles in the Prius's blind spots and alerting the driver accordingly.

WARNING

Cautions regarding the use of the system

  • The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings.
  • The Blind Spot Monitor is a supplementary function which alerts the driver that a vehicle is in a blind spot of the outside rear view mirrors or is approaching rapidly from behind into a blind spot. Do not overly rely on the Blind Spot Monitor. As the function cannot judge if it is safe to change lanes, over reliance could lead to an accident resulting in death or serious injury. As the system may not function correctly under certain conditions, the driver's own visual confirmation of safety is necessary.
  • System components
  • Blind Spot Monitor operation

System components

System components Toyota Prius (2024-2025)
  1. Meter control switches

Turning the Blind Spot Monitor on/off.

  1. Outside rear view mirror indicators

When a vehicle is detected in a blind spot of the outside rear view mirrors or approaching rapidly from behind into a blind spot, the outside rear view mirror indicator on the detected side will illuminate. If the turn signal lever is operated toward the detected side, the outside rear view mirror indicator will flash and a buzzer will sound.

  1. Driving assist information indicator

Illuminates when the Blind Spot Monitor is turned off. At this time, a message will be displayed on the multi-information display.

Outside rear view mirror indicator visibility

In strong sunlight, the outside rear view mirror indicator may be difficult to see

Buzzer

If the volume setting of the audio system is high or the surrounding area is loud, it may be difficult to hear the buzzer.

Customization

Some functions can be customized.

WARNING

To ensure the system can operate properly

Blind Spot Monitor sensors are installed behind the left and right sides of the rear bumper respectively.

Observe the following to ensure the Blind Spot Monitor can operate correctly.

  • Keep the sensors and the surrounding areas on the rear bumper clean at all times.

    If a sensor or its surrounding area on the rear bumper is dirty or covered with snow, the Blind Spot Monitor may not operate and a warning message will be displayed. In this situation, clear off the dirt or snow and drive the vehicle with the operation conditions of the BSM function satisfied for approximately 10 minutes. If the warning message does not disappear, have the vehicle inspected by your Toyota dealer.

To ensure the system can operate properly Toyota Prius (2024-2025)
  • Do not attach accessories, stickers (including transparent stickers), aluminum tape, etc. to a sensor or its surrounding area on the rear bumper.
  • Do not subject a sensor or its surrounding area on the rear bumper to a strong impact.

    If a sensor is moved even slightly off position, the system may malfunction and vehicles may not be detected correctly.

    In the following situations, have your vehicle inspected by your Toyota dealer.

  • A sensor or its surrounding area is subject to a strong impact.
  • If the surrounding area of a sensor is scratched or dented, or part of them has become disconnected.
  • Do not disassemble the sensor.
  • Do not modify the sensor or surrounding area on the rear bumper.
  • If a sensor or the rear bumper needs to be removed/installed or replaced, contact your Toyota dealer.
  • The sensors are likely to be affected by paint on the rear bumper. If the rear bumper is not repaired correctly, the Blind Spot Monitor may not operate with a warning message displayed.

    If any paint repair is needed, contact your Toyota dealer.

Turning the Blind Spot Monitor on/off

The Blind Spot Monitor can be enabled/disabled on of the multi-information display.

When the Blind Spot Monitor is off, the driving assist information indicator will illuminate and a message will be displayed on the multi-information display.

Each time the power switch is turned to ON, the Blind Spot Monitor is enabled.

Blind Spot Monitor operation

Objects that can be detected while driving

The Blind Spot Monitor uses rear side radar sensors to detect the following vehicles traveling in adjacent lanes and advises the driver of the presence of such vehicles via the indicators on the outside rear view mirrors.

Objects that can be detected while driving
  1. Vehicles that are traveling in areas that are not visible using the outside rear view mirrors (the blind spots)
  2. Vehicles that are approaching rapidly from behind in areas that are not visible using the outside rear view mirrors (the blind spots)

Detection range while driving

The areas that vehicles can be detected in are outlined below.

Detection range while driving

The range of each detection area is:

  1. Approximately 1.6 ft. (0.5 m) to 11.5 ft. (3.5 m) from either side of the vehicle*1
  2. Approximately 3.3 ft. (1 m) forward of the rear bumper*2
  3. Approximately 9.8 ft. (3 m) from the rear bumper
  4. Approximately 9.8 ft. (3 m) to 230 ft. (70 m) from the rear bumper*3

*1:The area between the side of the vehicle and 1.6 ft. (0.5 m) from the side of the vehicle cannot be detected.

*2:While the vehicle is to being overtaken, up to approximately 9.8 ft. (3 m) forward of the rear bumper will be detected.

*3:The greater the difference in speed between your vehicle and the detected vehicle is, the farther away the vehicle will be detected, causing the outside rear view mirror indicator to illuminate or flash.

The Blind Spot Monitor linked function

The LDA (Lane Departure Alert) has a function that uses information of detected vehicles driving in an adjacent lane. For details about the function and its operating conditions

The Blind Spot Monitor is operational when

The Blind Spot Monitor is operational when all of the following conditions are met:

  • The power switch is in ON.
  • The Blind Spot Monitor is on.
  • The shift position is in a position other than R.
  • The vehicle speed is approximately 10 km/h or more.

The Blind Spot Monitor will detect a vehicle when

The Blind Spot Monitor will detect a vehicle present in the detection area in the following situations:

  • A vehicle in an adjacent lane overtakes your vehicle.
  • You overtake a vehicle in an adjacent lane slowly.
  • Another vehicle enters the detection area when it changes lanes.

Situations in which the Blind Spot Monitor cannot detect vehicles

The Blind Spot Monitor cannot detect the following vehicles and other objects:

  • Small motorcycles, bicycles, pedestrians, etc.*
  • Vehicles traveling in the opposite direction
  • Guardrails, walls, signs, parked vehicles and similar stationary objects*
  • Following vehicles that are in the same lane*
  • Vehicles traveling 2 lanes away from your vehicle*
  • Vehicles which are being overtaken rapidly by your vehicle.*

*: Depending on the conditions, detection of a vehicle and/or object may occur.

Situations in which the buzzer does not sound

In the following situations, the outside rear view mirror indicator flashes but the buzzer does not sound even when the turn signal lever is operated.

  • When another vehicle is detected while the turn signal lever is being operated
  • When your vehicle overtakes a vehicle in an adjacent lane with a large speed difference*

*: Depending on the conditions, the buzzer may sound.

Conditions under which the system may not function correctly

  • The Blind Spot Monitor may not detect vehicles correctly in the following situations:
  • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area
  • When mud, snow, ice, a sticker, etc. is covering the sensor or surrounding area on the rear bumper
  • When driving on a road surface that is wet with standing water during bad weather, such as heavy rain, snow, or fog
  • When multiple vehicles are approaching with only a small gap between each vehicle
  • When the distance between your vehicle and a following vehicle is short
  • When there is a significant difference in speed between your vehicle and the vehicle that enters the detection area
  • When the difference in speed between your vehicle and another vehicle is changing
  • When a vehicle enters a detection area traveling at about the same speed as your vehicle
  • As your vehicle starts from a stop, a vehicle remains in the detection area
  • When driving up and down consecutive steep inclines, such as hills, dips in the road, etc.
  • When driving on roads with sharp bends, consecutive curves, or uneven surfaces
  • When vehicle lanes are wide, or when driving on the edge of a lane, and the vehicle in an adjacent lane is far away from your vehicle
  • When an accessory (such as a bicycle carrier) is installed to the rear of the vehicle
  • When there is a significant difference in height between your vehicle and the vehicle that enters the detection area
  • Immediately after the Blind Spot Monitor is turned on
  • When towing with the vehicle
  • Instances of the Blind Spot Monitor unnecessarily detecting a vehicle and/or object may increase in the following situations:
  • When the sensor is misaligned due to a strong impact to the sensor or its surrounding area
  • When the distance between your vehicle and a guardrail, wall, etc.

    that enters the detection area is short

  • When driving up and down consecutive steep inclines, such as hills, dips in the road, etc.
  • When vehicle lanes are narrow, or when driving on the edge of a lane, and a vehicle traveling in a lane other than the adjacent lanes enters the detection area
  • When driving on roads with sharp bends, consecutive curves, or uneven surfaces
  • When the tires are slipping or spinning
  • When the distance between your vehicle and a following vehicle is short
  • When an accessory (such as a bicycle carrier) is installed to the rear of the vehicle
  • When towing with the vehicle