Skid control buzzer circuit

The skid control buzzer sounds while the vsc is activated.

When replacing the abs and traction actuator, perform the zero point calibration (see page bc- 24).

1. 1
   Check can communication system
2. 2
   Check if the can communication dtc is output (see page ca-34).

Result

1. 1
   Perform active test by intelligent tester (skid control buzzer)
2. 2
   Select the active test, generate a control command, and then check that the skid control buzzer operate.

   

1. 1
   Inspect combination meter
2. 2
   Inspect the combination meter (see page me-15).