Vsc warning light does not come on

Refer to the description of "vsc warning light remains on" (see page bc-139).

Refer to the vsc warning light circuit (see page bc-140).

When replacing the abs and traction actuator, perform the zero point calibration (see page bc- 24).

1. 1
   Inspect can communication system
2. 2
   Check if the can communication system dtc is output (see page bc-47).

Result

1. 1
   Perform active test by intelligent tester (vsc warning light)
2. 2
   Select the active test, generate a control command, and then check that the vsc warning light operates.

   

1. 1
   Check combination meter assembly
2. 2
   Check the combination meter (see page ca-34).